Name: Osmo - Anti-Slip Decking oil - 430 Satin clear - 750ml
Brand: OSMO
SKU: 28711
Availability: InStock

Description

Osmo Anti-Slip Decking Oil is recommended as a top coat after a first coat of Osmo Decking-Oil – to produce a slip resistant and safer decking surface. A satin finish which is extremely water resistant and dirt repellent. The microporous finish is based on natural vegetable oils to allow the wood to breathe and helps regulate the moisture content reducing swelling and shrinkage, the finish will not crack, flake, peel or blister.

It is recommended to apply after a pigmented finish however if applying after a clear treatment, the wood naturally greys over time.

24m²/L with one coat

Coverage

12 hours

Dry time

2 coats

Coats

Additional information

Brand	OSMO
Recommended use:	As a top coat for coloured Osmo Decking Oil or Natural Oil Woodstain
Surface preparation	We recommend a base coat with a coloured Osmo Decking Oil, such as: Osmo Bangkirai-Oil, Larch-Oil or Douglas Fir Oil or Osmo Natural Oil Woodstain. Before applying an Osmo coloured base coat ensure the bare wood species has been properly prepared. Please refer to the coloured Osmo Decking Oil product for more guidance on wood species preparation. Osmo Anti-Slip Decking Oil 430 top coat acts as protection against weathering and extends the life of the coating. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Anti-Slip Decking Oil 430 is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. For renovation works, clean existing, intact Osmo Decking oils thoroughly with diluted Osmo Decking Cleaner. De-grey and clean already greyed or weathered wood at the same time with Osmo Wood Reviver Power-Gel and rinse well. Avoid using jet / power washers to clean as this can be detrimental to the existing coating and reduce coverage of an Osmo finish. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Method of application	With Osmo Flat Brush, apply thinly along the wood grain and spread well. For quicker application on larger areas, we recommend our Osmo Decking Brush (150 mm) which is tailored for decking and allows you to work ergonomically. Spread well and evenly. Allow to dry for approx. 12 hours under good ventilation. For renovation works, one coat applied to the clean and dry surface is usually sufficient.
Note	Osmo Anti-Slip Decking Oil 430 is clear satin and therefore it offers only limited protection against UV radiation (greying). With a combination of a coloured base coat and a top coat with Osmo Anti-Slip Decking Oil 430, your decking is fully protected. Osmo Anti-Slip Decking Oil 430 is not suitable for a single product application. Oils enhance the natural colour tone of wood (permanent wet effect). To avoid greying and declining non-slip effect on high traffic areas, these areas should be cleaned and recoated at the right time. If the greying process has already begun, de-grey the surface with Osmo Wood Reviver Power-Gel, rinse well then recoat. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating.
Care	Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean ( for green growth) . Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

About brand

OSMO

The only producers to coat our wooden products with wooden finishes from our own product development and production. Worldwide the name Osmo stands for quality from Germany.

OUR

140-years of experience handling wood and over 50-years of developing our own finishing systems gives us in-depth competence in both areas, you can benefit from our experience.

SUSTAINABLE

The foundation of Osmo wood finishes has been based upon purified and refined natural resources which are carefully harvested into natural oils and hard waxes. Good for wood, and the environment.

MISSION

Preserve the natural beauty and durability of wood with only the highest quality and environmentally friendly products that you can rely on.

By using carefully harvested natural oils and hard waxes, Osmo is proud to call its products vegan.

Osmo harnesses all the goodness of nature, without using ingredients from any animals.

Top tips

Stir well using a flat stirring stick or spatula. Failure to mix the colour and all ingredients could lead to an increased patchiness.
Ideally the new surface will be finished to a final P120 grit sand paper grade. This is the optimal grade for applying Osmo UV Protection-Oils.
For ingredient-rich wood species (eg: Cedar, Iroko, Teak, Mahogany etc.), please allow 12 weeks weathering prior to application. Weathering will improve absorbency for the Osmo product to penetrate in to the wood. If the wood has greyed after weathering, use Osmo Wood Reviver Power Gel to refresh the colour once more. Avoid refreshing colour through sanding as this will reveal fresh wood ingredients, and the surface will need to be weathered once more.
Osmo UV Protection-Oil Tints 429 Natural is not recommended for use on ingredient-rich (dark/reddish) wood species because it is visible as slightly white chalky surface. A trial application is always recommended.
Over application of Osmo UV Protection-Oil Tints 429 Natural may lead to the inherent white pigments becoming visible. The product may appear more white on very textured / rough sawn surfaces. Remove excess white before allowing the surface to dry.
UV-Protection Oils perform optimally on vertically structured timber. For horizontal sections there will be more maintenance. On horizontal sections, ensure at least a 15 degree angle to facilitate water run-off. Sharp edges must be rounded (radius > 2 mm).
Over application and/or low ventilation can increase the drying times.
UV rays from the sun help to break down protective lignin surrounding the fibres in the wood. Moisture also helps to deplete the lignin and the wood fibres begin to grey naturally. Osmo UV-Protection Oils delay the greying effect 12 x more effectively than bare timber.
Osmo UV-Protection-Oil Tints are furnished with active biocides to help protect the film coating against the effects from mould, algae and fungal attack. The added biocides do not prevent mould, algae and fungal growth forming on the coating.
Some timbers like Oak and Chestnut are notoriously rich in natural tannins and these ingredients can blacken surfaces when exposed to moisture, sunlight and iron oxides (eg from wire wool). Horizontal sections are more prone to discolouration whereby moisture can accumulate then escape through a breathable coating like Osmo. As the moisture escapes it lowers the risk of warping however, natural tannins can migrate to the surface and cause some staining. To help reduce this, try to clean the first signs of tannin spots away from the coating with a damp cloth. Over time, the tannins will deplete and the discolouration will be less problematic. Choosing a darker coloured Osmo UV-Protection oil tint can also help to mask discolouration.
Many wood species (eg Larch) contain water-soluble coloured extractives which may leach out naturally when weathered. Bare weathered wood can often be refreshed using Osmo Wood Reviver Power Gel prior to treatment. Always trial apply first.

Osmo – Anti-Slip Decking oil – 430 Satin clear – 750ml

FREE Delivery to UK mainland, orders before 11am dispatched the same day

24m²/L with one coat

12 hours

2 coats

OSMO

The only producers to coat our wooden products with wooden finishes from our own product development and production. Worldwide the name Osmo stands for quality from Germany.

Osmo – Anti-Slip Decking oil – 430 Satin clear – 750ml

FREE Delivery to UK mainland, orders before 11am dispatched the same day

24m²/L with one coat

12 hours

2 coats

OSMO

The only producers to coat our wooden products with wooden finishes from our own product development and production. Worldwide the name Osmo stands for quality from Germany.

Related products